F-40 LIQFILsuper40

The LIQFIL Super 40 (F-40) is a fully automatic capsule filling machine with an output capacity of 40,000 capsules/hour. It is capable of filling various types of dosage forms such as powders, pellets, beads, granules, minitabs, pastes, oils and liquids. When it comes to powder filling, compressed filling methods and vibration filling methods can be easily changed. In addition to its versatility in filling multiple dosage forms, the LIQFIL Super 40 (F-40) maintains highly accurate fill weights of finished products.

Features of the LIQFIL Super 40

• Rectification and transportation of capsules - The capsule rotary rectification system available on this machine was developed by Qualicaps and has been patented in 10 countries. During capsule rectification, capsule defects such as "Deformation", "Scratch", and "Peel of imprinted characters" does not occur since no external pressures are applied to capsules.
• Separation of capsules - When the body of the capsule reaches the end of the body bushing, an O-ring acts as a shock absorber to avoid cracking of the capsule.
• Feed and filling of drug substances - A disk feeder cuts down and supplies fill without stirring, making it possible to supply fixed quantities without changing the particles distribution.
• Adjustment of filled quantity - Capsules are filled directly into the body using a mechanical vibration filling method. After pressing in equal density, the fixed quantity is pushed upward from the bottom, the weight is adjusted by scraping the surplus powder out, and the capsule is joined.
• Joining - The filled capsule body is lifted upward by the pusher and joined with the cap through the joining block. The joined capsules are lifted over the cap disc by pusher and then discharged.

The LIQFIL Super 40 (F-40) is compact, measuring 775 mm x 685 mm (30.7" x 26.8") and operates at 40,000 capsules/hour. It can fill hard capsule sizes of 00, 0, 1, 2, 3, 4, 5.

Machine specifications

	F-40
Dimensions	775 mm (w) x 685 mm (d) x 1845 mm (h)
Weight of Machine	700 kg
Power Source	3 phase, 200 V ~ 220 V, 50 / 60 Hz, 2.1 KVA
Vacuum Source	20 kPa (2000 mm H20), 4.5 m3 / min
Compressed Air	0.5 MPa (5 kgf / cm2G), 300 L / min (normal)
Production Output	40,000 capsules/hour
Capsule Sizes	00, 0, 1, 2, 3, 4, 5
Options	Automatic weight control system with length measuring device Capsule weight inspection machine

Highly skilled engineers at Technophar will design your system according to your specific capsule or tablet needs.